Update: Sec 232 Additional Tariffs on Aluminum and Steel Derivatives
A new Presidential Proclamation was released on January 24, 2020 to expand the list of aluminum and steel products subject to the additional duties under Section 232, 10% on aluminum and 25% on steel products.
The derivative articles are described in Annex I (aluminum) and Annex II (steel) of Proclamation 9704 and 9705 and will be subject to Section 232 duties effective on February 8, 2020.
Secretary determined that an article is “derivative” of an aluminum article or steel article if all of the following conditions are present:
(a) the aluminum article or steel article represents, on average, two-thirds or more of the total cost of materials of the derivative article; (b) import volumes of such derivative article increased year-to-year since June 1, 2018, following the imposition of the tariffs in Proclamation 9704 and Proclamation 9705, as amended by Proclamation 9739 and Proclamation 9740, respectively, in comparison to import volumes of such derivative article during the 2 preceding years; and (c) import volumes of such derivative article following the imposition of the tariffs exceeded the 4 percent average increase in the total volume of goods imported into the United States during the same period since June 1, 2018. The modifications to subchapter III of chapter 99 of the Harmonized Tariff Schedule of the United States described in Annex I (aluminum) and Annex II (steel) to this proclamation implement the Secretary’s determinations in this regard.
To read the new Presidential Proclamation:
Aluminum Derivatives:
(A) stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum and with steel core, not electrically insulated; the foregoing fitted with fittings or made up into articles (described in subheading 7614.10.50);
(B) stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum and not with steel core, not electrically insulated; the foregoing comprising electrical conductors, not fitted with fittings or made up into articles (described in subheading 7614.90.20);
(C) stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum and not with steel core, not electrically insulated; the foregoing not comprising electrical conductors, not fitted with fittings or made up into articles (described in subheading 7614.90.40);
(D) stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum and not with steel core, not electrically insulated; the foregoing fitted with fittings or made up into articles (described in subheading 7614.90.50);
(E) bumper stampings of aluminum, the foregoing comprising parts and accessories of the motor vehicles of headings 8701 to 8705 (described in subheading 8708.10.30); and
(F) body stampings of aluminum, for tractors suitable for agricultural use (described in subheading 8708.29.21).
The additional 10% aluminum duties apply to the above articles regardless of origin. The only exception is for aluminum articles that originate in Argentina, Australia, Canada and Mexico.
Steel Derivatives:
(A) nails, tacks (other than thumb tacks), drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material (excluding such articles with heads of copper), suitable for use in powder-actuated handtools, threaded (described in subheading 7317.00.30); and
(B) nails, tacks (other than thumb tacks), drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material (excluding such articles with heads of copper), of one piece construction, whether or not made of round wire; the foregoing described in statistical reporting numbers 7317.00.5503, 7317.00.5505, 7317.00.5507, 7317.00.5560, 7317.00.5580 or 7317.00.6560 only and not in other statistical reporting numbers of subheadings 7317.00.55 and 7317.00.65;
(C) bumper stampings of steel, the foregoing comprising parts and accessories of the motor vehicles of headings 8701 to 8705 (described in subheading 8708.10.30); and
(D) body stampings of steel, for tractors suitable for agricultural use (described in subheading 8708.29.21)
Additional Sources:
LACBFFA News Flash: Compliments of Roll & Harris
https://www.strtrade.com/news-publications-tariff-steel-aluminum-derivative-232-012820.html